CONDITIONS | IMPRESSUM | SITEMAP |   SEARCH
Home
ASSAG Switzerland- Antriebstechnik - Hauptstrasse 50 CH-3186 Düdingen
Tel. +41 26 492 99 11 Fax. +41 26 492 99 10 - info@assag.ch
 ASSAG Nederland - Granaatstraat 54 - NL-7554 TR Hengelo
Tel. +31/74 246 98 80 - Fax. +31/74 246 98 99 - info@assag.ch
    Home
  print page
  back
                              
                                                 
                                             Cylkro® = Cylinder-Kronenrad

Cylkro® Face Gear Technology

The pinion is axial free. The Cylkro-gearset consists of a standard involute pinion and a Cylkro face gear. While mounting the gear set, only the Cylkro face gear needs to be adjusted in the axial direction. The axial position of the pinion can be chosen freely within its tooth width.Advantages:

  • Compared to conventional bevel gears, the adjustment of a Cylkro set is relatively easy.
  • Mounting deviations, caused be e.g. changes in temperature, do not affect the contact pattern.
  • There are no axial forces on the pinion shaft.
Helical teeth and off-set

In applications which require smaller gear diameters or better noise behaviour, Cylkro face gear sets can also be designed and manufactured with helical teeth. As in worm/wormwheels, Cylkro-transmissions can also be constructed with an off-set position of axis

Advantages:

  • Compared to worm transmissions, the relative sliding velocities are much smaller
  • Consequently, the efficiency can be compared to a spur gear transmission
Free choice of axis angle. Beside the more common 90° axis angle, Cylkro face gear sets are also available in any axis angle between 0° and 135°

The pitch circle between pinion and Cylkro gear is identical in any axis angle between 0° and 135° and is often the ideal solution in complex transmission concepts.


by webac